Contact – +1-276-477-5910
Email – [email protected]

Home >> Latest Reports

LATEST REPORTS

PRESS RELEASES

The World Market for Stainless Steel Flanges: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for stainless steel flanges. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-...

9/4/2020 | Iron & Steel

The World Market for Stainless Steel Butt Welded Fittings: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for stainless steel butt welded fittings. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented...

9/4/2020 | Iron & Steel

The World Market for Cast Iron Nonmalleable Cast Fittings: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cast iron nonmalleable cast fittings. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented...

9/4/2020 | Iron & Steel

The World Market for Iron and Steel Casing and Tubing Used In Drilling for Oil or Gas: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron and steel casing and tubing used in drilling for oil or gas. With the globalization of this market, managers can no longer be contented with a local view. N...

9/4/2020 | Iron & Steel

The World Market for Iron and Steel Line Pipe with Internal and External Circular Cross-sections and External Diameter Over 406.4 Mm for Oil and Gas Pipelines Excluding Seamless Line Pipe: A 2021 Glob...

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line...

9/4/2020 | Iron & Steel

The World Market for Iron and Steel Casing Used In Drilling for Oil or Gas: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron and steel casing used in drilling for oil or gas. With the globalization of this market, managers can no longer be contented with a local view. Nor can mana...

9/4/2020 | Iron & Steel

The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-weight Manganese Content of 20% or More: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more. With the globalization of th...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for zinc ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for lead ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for tin ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-o...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for stainless steel flanges. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for stainless steel flanges for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying stainless steel flanges? What is the dollar value of these imports? How much do the imports of stainless steel flanges vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of stainless steel flanges? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported stainless steel flanges. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of stainless steel flanges, for each individual country. Chapter 4 does the same, but for imports of stainless steel flanges for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of stainless steel flanges to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in stainless steel flanges (i.e. their market shares are close or equal to zero percent). "Stainless Steel Flanges" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "stainless steel flanges" is 67953. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for stainless steel flanges. Closely related reports published by ICON Group include the following: • The World Market for Cast Iron Nonmalleable Cast Fittings: A 2021 Global Trade Perspective • The World Market for Cast Iron Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing and Tubing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Cast Fittings Excluding of Nonmalleable Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Line Pipe with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm for Oil and Gas Pipelines Excluding Seamless Line Pipe: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Line Pipe Used for Oil and Gas Pipelines Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tube and Pipe Fittings: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tubes and Pipes with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm Excluding Tubes and Pipes: A 2021 Global Trade Perspective • The World Market for Iron Casing, Tubing, and Drill Pipe Used in Drilling for Oil or Gas Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Stainless Steel Butt Welded Fittings: A 2021 Global Trade Perspective • The World Market for Stainless Steel Threaded Elbows, Bends, and Sleeves: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for stainless steel butt welded fittings. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for stainless steel butt welded fittings for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying stainless steel butt welded fittings? What is the dollar value of these imports? How much do the imports of stainless steel butt welded fittings vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of stainless steel butt welded fittings? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported stainless steel butt welded fittings. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of stainless steel butt welded fittings, for each individual country. Chapter 4 does the same, but for imports of stainless steel butt welded fittings for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of stainless steel butt welded fittings to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in stainless steel butt welded fittings (i.e. their market shares are close or equal to zero percent). "Stainless Steel Butt Welded Fittings" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "stainless steel butt welded fittings" is 67955. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for stainless steel butt welded fittings. Closely related reports published by ICON Group include the following: • The World Market for Cast Iron Nonmalleable Cast Fittings: A 2021 Global Trade Perspective • The World Market for Cast Iron Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing and Tubing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Cast Fittings Excluding of Nonmalleable Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Line Pipe with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm for Oil and Gas Pipelines Excluding Seamless Line Pipe: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Line Pipe Used for Oil and Gas Pipelines Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tube and Pipe Fittings: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tubes and Pipes with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm Excluding Tubes and Pipes: A 2021 Global Trade Perspective • The World Market for Iron Casing, Tubing, and Drill Pipe Used in Drilling for Oil or Gas Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Stainless Steel Flanges: A 2021 Global Trade Perspective • The World Market for Stainless Steel Threaded Elbows, Bends, and Sleeves: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cast iron nonmalleable cast fittings. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for cast iron nonmalleable cast fittings for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying cast iron nonmalleable cast fittings? What is the dollar value of these imports? How much do the imports of cast iron nonmalleable cast fittings vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of cast iron nonmalleable cast fittings? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported cast iron nonmalleable cast fittings. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of cast iron nonmalleable cast fittings, for each individual country. Chapter 4 does the same, but for imports of cast iron nonmalleable cast fittings for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of cast iron nonmalleable cast fittings to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in cast iron nonmalleable cast fittings (i.e. their market shares are close or equal to zero percent). "Cast Iron Nonmalleable Cast Fittings" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "cast iron nonmalleable cast fittings" is 67951. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for cast iron nonmalleable cast fittings. Closely related reports published by ICON Group include the following: • The World Market for Cast Iron Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing and Tubing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Cast Fittings Excluding of Nonmalleable Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Line Pipe with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm for Oil and Gas Pipelines Excluding Seamless Line Pipe: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Line Pipe Used for Oil and Gas Pipelines Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tube and Pipe Fittings: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tubes and Pipes with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm Excluding Tubes and Pipes: A 2021 Global Trade Perspective • The World Market for Iron Casing, Tubing, and Drill Pipe Used in Drilling for Oil or Gas Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Stainless Steel Butt Welded Fittings: A 2021 Global Trade Perspective • The World Market for Stainless Steel Flanges: A 2021 Global Trade Perspective • The World Market for Stainless Steel Threaded Elbows, Bends, and Sleeves: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron and steel casing and tubing used in drilling for oil or gas. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron and steel casing and tubing used in drilling for oil or gas for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying iron and steel casing and tubing used in drilling for oil or gas? What is the dollar value of these imports? How much do the imports of iron and steel casing and tubing used in drilling for oil or gas vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of iron and steel casing and tubing used in drilling for oil or gas? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported iron and steel casing and tubing used in drilling for oil or gas. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of iron and steel casing and tubing used in drilling for oil or gas, for each individual country. Chapter 4 does the same, but for imports of iron and steel casing and tubing used in drilling for oil or gas for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of iron and steel casing and tubing used in drilling for oil or gas to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in iron and steel casing and tubing used in drilling for oil or gas (i.e. their market shares are close or equal to zero percent). "Iron and Steel Casing and Tubing Used In Drilling for Oil or Gas" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "iron and steel casing and tubing used in drilling for oil or gas" is 67942. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for iron and steel casing and tubing used in drilling for oil or gas. Closely related reports published by ICON Group include the following: • The World Market for Cast Iron Nonmalleable Cast Fittings: A 2021 Global Trade Perspective • The World Market for Cast Iron Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Cast Fittings Excluding of Nonmalleable Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Line Pipe with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm for Oil and Gas Pipelines Excluding Seamless Line Pipe: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Line Pipe Used for Oil and Gas Pipelines Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tube and Pipe Fittings: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tubes and Pipes with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm Excluding Tubes and Pipes: A 2021 Global Trade Perspective • The World Market for Iron Casing, Tubing, and Drill Pipe Used in Drilling for Oil or Gas Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Stainless Steel Butt Welded Fittings: A 2021 Global Trade Perspective • The World Market for Stainless Steel Flanges: A 2021 Global Trade Perspective • The World Market for Stainless Steel Threaded Elbows, Bends, and Sleeves: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe? What is the dollar value of these imports? How much do the imports of iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe, for each individual country. Chapter 4 does the same, but for imports of iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe (i.e. their market shares are close or equal to zero percent). "Iron and Steel Line Pipe with Internal and External Circular Cross-sections and External Diameter Over 406.4 Mm for Oil and Gas Pipelines Excluding Seamless Line Pipe" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe" is 67931. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for iron and steel line pipe with internal and external circular cross-sections and external diameter over 406.4 mm for oil and gas pipelines excluding seamless line pipe. Closely related reports published by ICON Group include the following: • The World Market for Cast Iron Nonmalleable Cast Fittings: A 2021 Global Trade Perspective • The World Market for Cast Iron Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing and Tubing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Cast Fittings Excluding of Nonmalleable Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Line Pipe Used for Oil and Gas Pipelines Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tube and Pipe Fittings: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tubes and Pipes with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm Excluding Tubes and Pipes: A 2021 Global Trade Perspective • The World Market for Iron Casing, Tubing, and Drill Pipe Used in Drilling for Oil or Gas Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Stainless Steel Butt Welded Fittings: A 2021 Global Trade Perspective • The World Market for Stainless Steel Flanges: A 2021 Global Trade Perspective • The World Market for Stainless Steel Threaded Elbows, Bends, and Sleeves: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron and steel casing used in drilling for oil or gas. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron and steel casing used in drilling for oil or gas for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying iron and steel casing used in drilling for oil or gas? What is the dollar value of these imports? How much do the imports of iron and steel casing used in drilling for oil or gas vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of iron and steel casing used in drilling for oil or gas? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported iron and steel casing used in drilling for oil or gas. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of iron and steel casing used in drilling for oil or gas, for each individual country. Chapter 4 does the same, but for imports of iron and steel casing used in drilling for oil or gas for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of iron and steel casing used in drilling for oil or gas to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in iron and steel casing used in drilling for oil or gas (i.e. their market shares are close or equal to zero percent). "Iron and Steel Casing Used In Drilling for Oil or Gas" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "iron and steel casing used in drilling for oil or gas" is 67932. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for iron and steel casing used in drilling for oil or gas. Closely related reports published by ICON Group include the following: • The World Market for Cast Iron Nonmalleable Cast Fittings: A 2021 Global Trade Perspective • The World Market for Cast Iron Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing and Tubing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Cast Fittings Excluding of Nonmalleable Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Line Pipe with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm for Oil and Gas Pipelines Excluding Seamless Line Pipe: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Line Pipe Used for Oil and Gas Pipelines Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tube and Pipe Fittings: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tubes and Pipes with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm Excluding Tubes and Pipes: A 2021 Global Trade Perspective • The World Market for Iron Casing, Tubing, and Drill Pipe Used in Drilling for Oil or Gas Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Stainless Steel Butt Welded Fittings: A 2021 Global Trade Perspective • The World Market for Stainless Steel Flanges: A 2021 Global Trade Perspective • The World Market for Stainless Steel Threaded Elbows, Bends, and Sleeves: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more? What is the dollar value of these imports? How much do the imports of manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more, for each individual country. Chapter 4 does the same, but for imports of manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more (i.e. their market shares are close or equal to zero percent). "Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-weight Manganese Content of 20% or More" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more" is 2877. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for manganese ores and concentrates including manganiferous iron ores and concentrates with dry-weight manganese content of 20% or more. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for zinc ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for zinc ores and concentrates for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying zinc ores and concentrates? What is the dollar value of these imports? How much do the imports of zinc ores and concentrates vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of zinc ores and concentrates? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported zinc ores and concentrates. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of zinc ores and concentrates, for each individual country. Chapter 4 does the same, but for imports of zinc ores and concentrates for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of zinc ores and concentrates to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in zinc ores and concentrates (i.e. their market shares are close or equal to zero percent). "Zinc Ores and Concentrates" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "zinc ores and concentrates" is 2875. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for zinc ores and concentrates. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-Weight Manganese Content of 20% or More: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for lead ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for lead ores and concentrates for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying lead ores and concentrates? What is the dollar value of these imports? How much do the imports of lead ores and concentrates vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of lead ores and concentrates? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported lead ores and concentrates. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of lead ores and concentrates, for each individual country. Chapter 4 does the same, but for imports of lead ores and concentrates for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of lead ores and concentrates to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in lead ores and concentrates (i.e. their market shares are close or equal to zero percent). "Lead Ores and Concentrates" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "lead ores and concentrates" is 2874. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for lead ores and concentrates. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-Weight Manganese Content of 20% or More: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for tin ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for tin ores and concentrates for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying tin ores and concentrates? What is the dollar value of these imports? How much do the imports of tin ores and concentrates vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of tin ores and concentrates? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported tin ores and concentrates. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of tin ores and concentrates, for each individual country. Chapter 4 does the same, but for imports of tin ores and concentrates for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of tin ores and concentrates to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in tin ores and concentrates (i.e. their market shares are close or equal to zero percent). "Tin Ores and Concentrates" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "tin ores and concentrates" is 2876. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for tin ores and concentrates. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-Weight Manganese Content of 20% or More: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

x

Use Code

SDMR20

Purchase any report

AVAIL FLAT DISCOUNT