Contact – +1-276-477-5910
Email – [email protected]

Home >> Latest Reports

LATEST REPORTS

PRESS RELEASES

The World Market for Concrete Reinforcing Bars of Iron or Non-alloy Steel and Bars and Rods of Free-cutting Steel In Irregularly Wound Coils: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils. With the globalization of this market, m...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Iron and Non-alloy Steel Bars and Rods That Have Been Deformed During Rolling: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling. With the globalization of this market, managers can no longer be conten...

9/4/2020 | Iron & Steel

The World Market for Cold-rolled Stainless Steel Flat-rolled Products Less Than 600 Mm Wide: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products less than 600 mm wide. With the globalization of this market, managers can no longer be contented with a local v...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled, Free-cutting Steel Bars and Rods In Irregular Coils: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled, free-cutting steel bars and rods in irregular coils. With the globalization of this market, managers can no longer be contented with a local view. No...

9/4/2020 | Iron & Steel

The World Market for High-speed Steel Bars and Rods: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for high-speed steel bars and rods. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with ...

9/4/2020 | Iron & Steel

The World Market for Irregular Coils of Hot-rolled Stainless Steel Bars and Rods: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for irregular coils of hot-rolled stainless steel bars and rods. With the globalization of this market, managers can no longer be contented with a local view. Nor ca...

9/4/2020 | Iron & Steel

The World Market for Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 0.5 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick. With the globalization of this market, managers can no longe...

9/4/2020 | Iron & Steel

The World Market for Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 0.5-1 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick. With the globalization of this market, managers can no longe...

9/4/2020 | Iron & Steel

The World Market for Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 1-3 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick. With the globalization of this market, managers can no longer ...

9/4/2020 | Iron & Steel

The World Market for Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. With the globalization of this market, managers can no long...

9/4/2020 | Iron & Steel

First
Previous
4
5
6
7
8
9
10
11
12
13
Next

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils? What is the dollar value of these imports? How much do the imports of concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils, for each individual country. Chapter 4 does the same, but for imports of concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils (i.e. their market shares are close or equal to zero percent). "Concrete Reinforcing Bars of Iron or Non-alloy Steel and Bars and Rods of Free-cutting Steel In Irregularly Wound Coils" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils" is 6761. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for concrete reinforcing bars of iron or non-alloy steel and bars and rods of free-cutting steel in irregularly wound coils. Closely related reports published by ICON Group include the following: • The World Market for Alloy Pig Iron and Spiegeleisen in Primary Forms: A 2021 Global Trade Perspective • The World Market for Alloy Steel Ingots and Other Primary Forms Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Alloy Steel Semi-Finished Products: A 2021 Global Trade Perspective • The World Market for Alloy Steel Semi-Finished Products Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Alloy Steel Wire Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Cast Iron Nonmalleable Cast Fittings: A 2021 Global Trade Perspective • The World Market for Cast Iron Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Cold-Formed or Cold-Finished Iron and Non-Alloy Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Iron and Non-Alloy Steel Flat-Rolled Products Measuring At Least 600 mm Wide and 3 mm Thick Excluding Coils (Yield Points): A 2021 Global Trade Perspective • The World Market for Cold-Rolled Iron or Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for Ferrochromium: A 2021 Global Trade Perspective • The World Market for Ferromanganese: A 2021 Global Trade Perspective • The World Market for Ferromanganese with Less Than 2% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Ferromanganese with over 2% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Ferronickel: A 2021 Global Trade Perspective • The World Market for Ferrosilicon: A 2021 Global Trade Perspective • The World Market for Ferrosilicon Chromium: A 2021 Global Trade Perspective • The World Market for Ferrosilicon Manganese: A 2021 Global Trade Perspective • The World Market for Free-Cutting Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Granules of Pig Iron, Spiegeleisen, Iron, or Steel: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hollow Drill Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron and Non-Alloy Steel Bars and Rods That Have Been Deformed during Rolling: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron or Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron or Non-Alloy Steel Flat-Rolled Products Measuring 150-600 mm Wide and At Least 4 mm Thick Excluding Coils (Yield Points): A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Free-Cutting Steel Bars and Rods in Irregular Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections Less Than 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Electrolytically Plated with Zinc and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Electrolytically Plated with Zinc and Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Aluminum and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Chromium Oxides or Chromium and Chromium Oxides and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Lead or Tern-Plate and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Tin: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Tin and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Tin and Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Wire: A 2021 Global Trade Perspective • The World Market for Iron and Steel Angles, Shapes, Sections (Excluding Rails), and Sheet Piling: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing and Tubing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Cast Fittings Excluding of Nonmalleable Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Line Pipe with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm for Oil and Gas Pipelines Excluding Seamless Line Pipe: A 2021 Global Trade Perspective • The World Market for Iron and Steel Rails Excluding Check-Rails and Rack Rails: A 2021 Global Trade Perspective • The World Market for Iron and Steel Railway and Tramway Track Construction Material: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Line Pipe Used for Oil and Gas Pipelines Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Sheet Piling, Welded Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tube and Pipe Fittings: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tubes and Pipes with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm Excluding Tubes and Pipes: A 2021 Global Trade Perspective • The World Market for Iron Casing, Tubing, and Drill Pipe Used in Drilling for Oil or Gas Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron Less Than 99.94% Pure or Non-Alloy Steel in Primary Forms Excluding Ingots: A 2021 Global Trade Perspective • The World Market for Iron Less Than 99.94% Pure or Non-Alloy Steel Ingots: A 2021 Global Trade Perspective • The World Market for Iron Less Than 99.94% Pure or Steel Ingots and Other Primary Forms: A 2021 Global Trade Perspective • The World Market for Iron of At Least 99.94% Purity and Spongy Ferrous Products in Lumps, Pellets, and Similar Forms: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Products Containing At Least .25% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Products Containing Less Than .25% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Shapes Containing Less Than .25% Carbon by Weight with a Nonsquare Rectangular Cross Section: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Shapes Containing Less Than .25% Carbon by Weight with Square Cross Section and Specified Width under Twice the Thickness: A 2021 Global Trade Perspective • The World Market for Irregular Coils of Hot-Rolled Stainless Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Nonalloyed Pig Iron in Primary Forms with Less Than 0.50% Phosphorus by Weight: A 2021 Global Trade Perspective • The World Market for Nonalloyed Pig Iron in Primary Forms with over 0.50% Phosphorus by Weight: A 2021 Global Trade Perspective • The World Market for Painted, Varnished, or Plastic-Coated Iron and Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Painted, Varnished, or Plastic-Coated Iron and Non-Alloy Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Painted, Varnished, or Plastic-Coated Iron and Non-Alloy Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Pig iron and Spiegeleisen in Pigs, Blocks, and Other Primary Forms: A 2021 Global Trade Perspective • The World Market for Pig Iron, Spiegeleisen, Iron or Steel Granules and Powders; Spongy Ferrous Products and Iron in Lumps or Pellets of At Least 99.94% Purity: A 2021 Global Trade Perspective • The World Market for Plated or Zinc-Coated Iron and Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Powders of Pig Iron, Spiegeleisen, Iron, or Steel: A 2021 Global Trade Perspective • The World Market for Ribbed Iron Bars and Rods: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Stainless Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Stainless Steel Butt Welded Fittings: A 2021 Global Trade Perspective • The World Market for Stainless Steel Flanges: A 2021 Global Trade Perspective • The World Market for Stainless Steel Ingots and Other Primary Forms: A 2021 Global Trade Perspective • The World Market for Stainless Steel Semi-Finished Products: A 2021 Global Trade Perspective • The World Market for Stainless Steel Threaded Elbows, Bends, and Sleeves: A 2021 Global Trade Perspective • The World Market for Stainless Steel Wire: A 2021 Global Trade Perspective • The World Market for Steel Wire Made of Stainless Steel and Other Alloys: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling? What is the dollar value of these imports? How much do the imports of hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling, for each individual country. Chapter 4 does the same, but for imports of hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling (i.e. their market shares are close or equal to zero percent). "Hot-rolled Iron and Non-alloy Steel Bars and Rods That Have Been Deformed During Rolling" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling" is 67611. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled iron and non-alloy steel bars and rods that have been deformed during rolling. Closely related reports published by ICON Group include the following: • The World Market for Cold-Formed or Cold-Finished Iron and Non-Alloy Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Concrete Reinforcing Bars of Iron or Non-Alloy Steel and Bars and Rods of Free-Cutting Steel in Irregularly Wound Coils: A 2021 Global Trade Perspective • The World Market for Free-Cutting Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hollow Drill Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Free-Cutting Steel Bars and Rods in Irregular Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections Less Than 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High: A 2021 Global Trade Perspective • The World Market for Iron and Steel Angles, Shapes, Sections (Excluding Rails), and Sheet Piling: A 2021 Global Trade Perspective • The World Market for Iron and Steel Sheet Piling, Welded Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Irregular Coils of Hot-Rolled Stainless Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Ribbed Iron Bars and Rods: A 2021 Global Trade Perspective • The World Market for Stainless Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products less than 600 mm wide. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for cold-rolled stainless steel flat-rolled products less than 600 mm wide for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying cold-rolled stainless steel flat-rolled products less than 600 mm wide? What is the dollar value of these imports? How much do the imports of cold-rolled stainless steel flat-rolled products less than 600 mm wide vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of cold-rolled stainless steel flat-rolled products less than 600 mm wide? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported cold-rolled stainless steel flat-rolled products less than 600 mm wide. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of cold-rolled stainless steel flat-rolled products less than 600 mm wide, for each individual country. Chapter 4 does the same, but for imports of cold-rolled stainless steel flat-rolled products less than 600 mm wide for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of cold-rolled stainless steel flat-rolled products less than 600 mm wide to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in cold-rolled stainless steel flat-rolled products less than 600 mm wide (i.e. their market shares are close or equal to zero percent). "Cold-rolled Stainless Steel Flat-rolled Products Less Than 600 Mm Wide" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "cold-rolled stainless steel flat-rolled products less than 600 mm wide" is 67556. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for cold-rolled stainless steel flat-rolled products less than 600 mm wide. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled, free-cutting steel bars and rods in irregular coils. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled, free-cutting steel bars and rods in irregular coils for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled, free-cutting steel bars and rods in irregular coils? What is the dollar value of these imports? How much do the imports of hot-rolled, free-cutting steel bars and rods in irregular coils vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled, free-cutting steel bars and rods in irregular coils? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled, free-cutting steel bars and rods in irregular coils. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled, free-cutting steel bars and rods in irregular coils, for each individual country. Chapter 4 does the same, but for imports of hot-rolled, free-cutting steel bars and rods in irregular coils for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled, free-cutting steel bars and rods in irregular coils to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled, free-cutting steel bars and rods in irregular coils (i.e. their market shares are close or equal to zero percent). "Hot-rolled, Free-cutting Steel Bars and Rods In Irregular Coils" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled, free-cutting steel bars and rods in irregular coils" is 67612. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled, free-cutting steel bars and rods in irregular coils. Closely related reports published by ICON Group include the following: • The World Market for Cold-Formed or Cold-Finished Iron and Non-Alloy Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Concrete Reinforcing Bars of Iron or Non-Alloy Steel and Bars and Rods of Free-Cutting Steel in Irregularly Wound Coils: A 2021 Global Trade Perspective • The World Market for Free-Cutting Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hollow Drill Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron and Non-Alloy Steel Bars and Rods That Have Been Deformed during Rolling: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections Less Than 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High: A 2021 Global Trade Perspective • The World Market for Iron and Steel Angles, Shapes, Sections (Excluding Rails), and Sheet Piling: A 2021 Global Trade Perspective • The World Market for Iron and Steel Sheet Piling, Welded Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Irregular Coils of Hot-Rolled Stainless Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Ribbed Iron Bars and Rods: A 2021 Global Trade Perspective • The World Market for Stainless Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for high-speed steel bars and rods. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for high-speed steel bars and rods for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying high-speed steel bars and rods? What is the dollar value of these imports? How much do the imports of high-speed steel bars and rods vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of high-speed steel bars and rods? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported high-speed steel bars and rods. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of high-speed steel bars and rods, for each individual country. Chapter 4 does the same, but for imports of high-speed steel bars and rods for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of high-speed steel bars and rods to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in high-speed steel bars and rods (i.e. their market shares are close or equal to zero percent). "High-speed Steel Bars and Rods" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "high-speed steel bars and rods" is 67617. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for high-speed steel bars and rods. Closely related reports published by ICON Group include the following: • The World Market for Cold-Formed or Cold-Finished Iron and Non-Alloy Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Concrete Reinforcing Bars of Iron or Non-Alloy Steel and Bars and Rods of Free-Cutting Steel in Irregularly Wound Coils: A 2021 Global Trade Perspective • The World Market for Free-Cutting Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hollow Drill Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron and Non-Alloy Steel Bars and Rods That Have Been Deformed during Rolling: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Free-Cutting Steel Bars and Rods in Irregular Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections Less Than 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High: A 2021 Global Trade Perspective • The World Market for Iron and Steel Angles, Shapes, Sections (Excluding Rails), and Sheet Piling: A 2021 Global Trade Perspective • The World Market for Iron and Steel Sheet Piling, Welded Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Irregular Coils of Hot-Rolled Stainless Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Ribbed Iron Bars and Rods: A 2021 Global Trade Perspective • The World Market for Stainless Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for irregular coils of hot-rolled stainless steel bars and rods. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for irregular coils of hot-rolled stainless steel bars and rods for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying irregular coils of hot-rolled stainless steel bars and rods? What is the dollar value of these imports? How much do the imports of irregular coils of hot-rolled stainless steel bars and rods vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of irregular coils of hot-rolled stainless steel bars and rods? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported irregular coils of hot-rolled stainless steel bars and rods. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of irregular coils of hot-rolled stainless steel bars and rods, for each individual country. Chapter 4 does the same, but for imports of irregular coils of hot-rolled stainless steel bars and rods for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of irregular coils of hot-rolled stainless steel bars and rods to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in irregular coils of hot-rolled stainless steel bars and rods (i.e. their market shares are close or equal to zero percent). "Irregular Coils of Hot-rolled Stainless Steel Bars and Rods" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "irregular coils of hot-rolled stainless steel bars and rods" is 67615. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for irregular coils of hot-rolled stainless steel bars and rods. Closely related reports published by ICON Group include the following: • The World Market for Cold-Formed or Cold-Finished Iron and Non-Alloy Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Concrete Reinforcing Bars of Iron or Non-Alloy Steel and Bars and Rods of Free-Cutting Steel in Irregularly Wound Coils: A 2021 Global Trade Perspective • The World Market for Free-Cutting Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hollow Drill Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron and Non-Alloy Steel Bars and Rods That Have Been Deformed during Rolling: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Free-Cutting Steel Bars and Rods in Irregular Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections Less Than 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High: A 2021 Global Trade Perspective • The World Market for Iron and Steel Angles, Shapes, Sections (Excluding Rails), and Sheet Piling: A 2021 Global Trade Perspective • The World Market for Iron and Steel Sheet Piling, Welded Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Ribbed Iron Bars and Rods: A 2021 Global Trade Perspective • The World Market for Stainless Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick? What is the dollar value of these imports? How much do the imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick, for each individual country. Chapter 4 does the same, but for imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick (i.e. their market shares are close or equal to zero percent). "Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 0.5 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick" is 67555. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 0.5 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick? What is the dollar value of these imports? How much do the imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick, for each individual country. Chapter 4 does the same, but for imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick (i.e. their market shares are close or equal to zero percent). "Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 0.5-1 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick" is 67554. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 0.5-1 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick? What is the dollar value of these imports? How much do the imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick, for each individual country. Chapter 4 does the same, but for imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick (i.e. their market shares are close or equal to zero percent). "Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 1-3 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick" is 67553. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 1-3 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? What is the dollar value of these imports? How much do the imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick, for each individual country. Chapter 4 does the same, but for imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick (i.e. their market shares are close or equal to zero percent). "Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick" is 67552. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

x

Use Code

SDMR20

Purchase any report

AVAIL FLAT DISCOUNT