Contact – +1-276-477-5910
Email – [email protected]

Home >> Latest Reports

LATEST REPORTS

PRESS RELEASES

The World Market for Hot-rolled, Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 3 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick. With the globalization of this market, managers can no longer ...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. With the globalization of this market, managers can no longe...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Product: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled product. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 3 Mm Thick In Coils: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils. With the globalization of this market, managers can no...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and 4.75 Mm Thick In Coils: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils. With the globalization of this market, managers can no longer...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick In Coils: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils. With the globalization of this market, managers can...

9/4/2020 | Iron & Steel

The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel. With the globalization of this market, managers can no longer be contented ...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrap of alloy steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with ...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for copper ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with ou...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings. With the globalization of this market, managers can no longer be contented with...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick? What is the dollar value of these imports? How much do the imports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick, for each individual country. Chapter 4 does the same, but for imports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick (i.e. their market shares are close or equal to zero percent). "Hot-rolled, Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 3 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick" is 67536. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick" is 67535. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled product. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled product for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled product? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled product vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled product? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled product. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled product, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled product for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled product to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled product (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Product" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled product" is 6753. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled product. Closely related reports published by ICON Group include the following: • The World Market for Alloy Pig Iron and Spiegeleisen in Primary Forms: A 2021 Global Trade Perspective • The World Market for Alloy Steel Ingots and Other Primary Forms Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Alloy Steel Semi-Finished Products: A 2021 Global Trade Perspective • The World Market for Alloy Steel Semi-Finished Products Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Alloy Steel Wire Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Cast Iron Nonmalleable Cast Fittings: A 2021 Global Trade Perspective • The World Market for Cast Iron Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Cold-Formed or Cold-Finished Iron and Non-Alloy Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Iron and Non-Alloy Steel Flat-Rolled Products Measuring At Least 600 mm Wide and 3 mm Thick Excluding Coils (Yield Points): A 2021 Global Trade Perspective • The World Market for Cold-Rolled Iron or Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for Concrete Reinforcing Bars of Iron or Non-Alloy Steel and Bars and Rods of Free-Cutting Steel in Irregularly Wound Coils: A 2021 Global Trade Perspective • The World Market for Ferrochromium: A 2021 Global Trade Perspective • The World Market for Ferromanganese: A 2021 Global Trade Perspective • The World Market for Ferromanganese with Less Than 2% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Ferromanganese with over 2% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Ferronickel: A 2021 Global Trade Perspective • The World Market for Ferrosilicon: A 2021 Global Trade Perspective • The World Market for Ferrosilicon Chromium: A 2021 Global Trade Perspective • The World Market for Ferrosilicon Manganese: A 2021 Global Trade Perspective • The World Market for Free-Cutting Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Granules of Pig Iron, Spiegeleisen, Iron, or Steel: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hollow Drill Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron and Non-Alloy Steel Bars and Rods That Have Been Deformed during Rolling: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron or Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron or Non-Alloy Steel Flat-Rolled Products Measuring 150-600 mm Wide and At Least 4 mm Thick Excluding Coils (Yield Points): A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Free-Cutting Steel Bars and Rods in Irregular Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections Less Than 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Electrolytically Plated with Zinc and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Electrolytically Plated with Zinc and Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Aluminum and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Chromium Oxides or Chromium and Chromium Oxides and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Lead or Tern-Plate and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Tin: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Tin and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Tin and Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Wire: A 2021 Global Trade Perspective • The World Market for Iron and Steel Angles, Shapes, Sections (Excluding Rails), and Sheet Piling: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing and Tubing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Cast Fittings Excluding of Nonmalleable Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Line Pipe with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm for Oil and Gas Pipelines Excluding Seamless Line Pipe: A 2021 Global Trade Perspective • The World Market for Iron and Steel Rails Excluding Check-Rails and Rack Rails: A 2021 Global Trade Perspective • The World Market for Iron and Steel Railway and Tramway Track Construction Material: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Line Pipe Used for Oil and Gas Pipelines Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Sheet Piling, Welded Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tube and Pipe Fittings: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tubes and Pipes with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm Excluding Tubes and Pipes: A 2021 Global Trade Perspective • The World Market for Iron Casing, Tubing, and Drill Pipe Used in Drilling for Oil or Gas Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron Less Than 99.94% Pure or Non-Alloy Steel in Primary Forms Excluding Ingots: A 2021 Global Trade Perspective • The World Market for Iron Less Than 99.94% Pure or Non-Alloy Steel Ingots: A 2021 Global Trade Perspective • The World Market for Iron Less Than 99.94% Pure or Steel Ingots and Other Primary Forms: A 2021 Global Trade Perspective • The World Market for Iron of At Least 99.94% Purity and Spongy Ferrous Products in Lumps, Pellets, and Similar Forms: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Products Containing At Least .25% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Products Containing Less Than .25% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Shapes Containing Less Than .25% Carbon by Weight with a Nonsquare Rectangular Cross Section: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Shapes Containing Less Than .25% Carbon by Weight with Square Cross Section and Specified Width under Twice the Thickness: A 2021 Global Trade Perspective • The World Market for Irregular Coils of Hot-Rolled Stainless Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Nonalloyed Pig Iron in Primary Forms with Less Than 0.50% Phosphorus by Weight: A 2021 Global Trade Perspective • The World Market for Nonalloyed Pig Iron in Primary Forms with over 0.50% Phosphorus by Weight: A 2021 Global Trade Perspective • The World Market for Painted, Varnished, or Plastic-Coated Iron and Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Painted, Varnished, or Plastic-Coated Iron and Non-Alloy Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Painted, Varnished, or Plastic-Coated Iron and Non-Alloy Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Pig iron and Spiegeleisen in Pigs, Blocks, and Other Primary Forms: A 2021 Global Trade Perspective • The World Market for Pig Iron, Spiegeleisen, Iron or Steel Granules and Powders; Spongy Ferrous Products and Iron in Lumps or Pellets of At Least 99.94% Purity: A 2021 Global Trade Perspective • The World Market for Plated or Zinc-Coated Iron and Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Powders of Pig Iron, Spiegeleisen, Iron, or Steel: A 2021 Global Trade Perspective • The World Market for Ribbed Iron Bars and Rods: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Stainless Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Stainless Steel Butt Welded Fittings: A 2021 Global Trade Perspective • The World Market for Stainless Steel Flanges: A 2021 Global Trade Perspective • The World Market for Stainless Steel Ingots and Other Primary Forms: A 2021 Global Trade Perspective • The World Market for Stainless Steel Semi-Finished Products: A 2021 Global Trade Perspective • The World Market for Stainless Steel Threaded Elbows, Bends, and Sleeves: A 2021 Global Trade Perspective • The World Market for Stainless Steel Wire: A 2021 Global Trade Perspective • The World Market for Steel Wire Made of Stainless Steel and Other Alloys: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 3 Mm Thick In Coils" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils" is 67533. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and 4.75 Mm Thick In Coils" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils" is 67531. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick In Coils" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils" is 67532. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel? What is the dollar value of these imports? How much do the imports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel, for each individual country. Chapter 4 does the same, but for imports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel (i.e. their market shares are close or equal to zero percent). "Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel" is 2823. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-Weight Manganese Content of 20% or More: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrap of alloy steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for waste and scrap of alloy steel for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying waste and scrap of alloy steel? What is the dollar value of these imports? How much do the imports of waste and scrap of alloy steel vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of waste and scrap of alloy steel? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported waste and scrap of alloy steel. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of waste and scrap of alloy steel, for each individual country. Chapter 4 does the same, but for imports of waste and scrap of alloy steel for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of waste and scrap of alloy steel to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in waste and scrap of alloy steel (i.e. their market shares are close or equal to zero percent). "Waste and Scrap of Alloy Steel" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "waste and scrap of alloy steel" is 2822. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for waste and scrap of alloy steel. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-Weight Manganese Content of 20% or More: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for copper ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for copper ores and concentrates for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying copper ores and concentrates? What is the dollar value of these imports? How much do the imports of copper ores and concentrates vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of copper ores and concentrates? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported copper ores and concentrates. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of copper ores and concentrates, for each individual country. Chapter 4 does the same, but for imports of copper ores and concentrates for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of copper ores and concentrates to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in copper ores and concentrates (i.e. their market shares are close or equal to zero percent). "Copper Ores and Concentrates" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "copper ores and concentrates" is 2831. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for copper ores and concentrates. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-Weight Manganese Content of 20% or More: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings? What is the dollar value of these imports? How much do the imports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings, for each individual country. Chapter 4 does the same, but for imports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings (i.e. their market shares are close or equal to zero percent). "Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings" is 28232. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings. Closely related reports published by ICON Group include the following: • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective ...

9/4/2020

x

Use Code

SDMR20

Purchase any report

AVAIL FLAT DISCOUNT