Contact – +1-276-477-5910
Email – [email protected]

Home >> Latest Reports

LATEST REPORTS

PRESS RELEASES

The World Market for Iron or Steel Towers and Lattice Masts: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron or steel towers and lattice masts. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be content...

9/4/2020 | Aluminum and Smelting;Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Iron or Steel Bridges and Bridge Sections: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron or steel bridges and bridge sections. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be cont...

9/4/2020 | Aluminum and Smelting;Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Iron or Steel Anchors, Grapnels, and Their Parts: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron or steel anchors, grapnels, and their parts. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers ...

9/4/2020 | Iron & Steel

The World Market for Iron or Steel Springs and Leaves for Springs: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron or steel springs and leaves for springs. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be c...

9/4/2020 | Iron & Steel

The World Market for Iron, Steel, or Copper Springs and Leaves for Springs: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron, steel, or copper springs and leaves for springs. With the globalization of this market, managers can no longer be contented with a local view. Nor can mana...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of Less Than 600 Mm Wide and At Least 4.75 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick. With the globalization of this market, managers can no longe...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and 4.75 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick. With the globalization of this market, managers can no longer be conte...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled, Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 3 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick. With the globalization of this market, managers can no longer ...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. With the globalization of this market, managers can no longe...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Product: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled product. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be...

9/4/2020 | Iron & Steel

First
Previous
1
2
3
4
5
6
7
8
9
10
Next

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron or steel towers and lattice masts. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron or steel towers and lattice masts for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying iron or steel towers and lattice masts? What is the dollar value of these imports? How much do the imports of iron or steel towers and lattice masts vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of iron or steel towers and lattice masts? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported iron or steel towers and lattice masts. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of iron or steel towers and lattice masts, for each individual country. Chapter 4 does the same, but for imports of iron or steel towers and lattice masts for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of iron or steel towers and lattice masts to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in iron or steel towers and lattice masts (i.e. their market shares are close or equal to zero percent). "Iron or Steel Towers and Lattice Masts" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "iron or steel towers and lattice masts" is 69112. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for iron or steel towers and lattice masts. Closely related reports published by ICON Group include the following: • The World Market for Aluminum Doors, Windows, Door Thresholds, and Window Frames: A 2021 Global Trade Perspective • The World Market for Aluminum Structures and Parts of Structures: A 2021 Global Trade Perspective • The World Market for Iron or Steel Bridges and Bridge Sections: A 2021 Global Trade Perspective • The World Market for Iron or Steel Doors, Windows, Door Thresholds, and Window Frames: A 2021 Global Trade Perspective • The World Market for Iron or Steel Equipment for Scaffolding, Shuttering, Propping, or Pit-Propping : A 2021 Global Trade Perspective • The World Market for Iron or Steel Structures and Parts of Structures: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron or steel bridges and bridge sections. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron or steel bridges and bridge sections for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying iron or steel bridges and bridge sections? What is the dollar value of these imports? How much do the imports of iron or steel bridges and bridge sections vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of iron or steel bridges and bridge sections? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported iron or steel bridges and bridge sections. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of iron or steel bridges and bridge sections, for each individual country. Chapter 4 does the same, but for imports of iron or steel bridges and bridge sections for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of iron or steel bridges and bridge sections to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in iron or steel bridges and bridge sections (i.e. their market shares are close or equal to zero percent). "Iron or Steel Bridges and Bridge Sections" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "iron or steel bridges and bridge sections" is 69111. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for iron or steel bridges and bridge sections. Closely related reports published by ICON Group include the following: • The World Market for Aluminum Doors, Windows, Door Thresholds, and Window Frames: A 2021 Global Trade Perspective • The World Market for Aluminum Structures and Parts of Structures: A 2021 Global Trade Perspective • The World Market for Iron or Steel Doors, Windows, Door Thresholds, and Window Frames: A 2021 Global Trade Perspective • The World Market for Iron or Steel Equipment for Scaffolding, Shuttering, Propping, or Pit-Propping : A 2021 Global Trade Perspective • The World Market for Iron or Steel Structures and Parts of Structures: A 2021 Global Trade Perspective • The World Market for Iron or Steel Towers and Lattice Masts: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron or steel anchors, grapnels, and their parts. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron or steel anchors, grapnels, and their parts for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying iron or steel anchors, grapnels, and their parts? What is the dollar value of these imports? How much do the imports of iron or steel anchors, grapnels, and their parts vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of iron or steel anchors, grapnels, and their parts? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported iron or steel anchors, grapnels, and their parts. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of iron or steel anchors, grapnels, and their parts, for each individual country. Chapter 4 does the same, but for imports of iron or steel anchors, grapnels, and their parts for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of iron or steel anchors, grapnels, and their parts to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in iron or steel anchors, grapnels, and their parts (i.e. their market shares are close or equal to zero percent). "Iron or Steel Anchors, Grapnels, and Their Parts" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "iron or steel anchors, grapnels, and their parts" is 69961. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for iron or steel anchors, grapnels, and their parts. Closely related reports published by ICON Group include the following: • The World Market for Armored Safes, Strong-Boxes and Doors, Safe Deposit Lockers for Strong Rooms, and Cash and Deed Boxes of Base Metal: A 2021 Global Trade Perspective • The World Market for Base Metal Flexible Tubing: A 2021 Global Trade Perspective • The World Market for Castors of Base Metal: A 2021 Global Trade Perspective • The World Market for Copper Chain and Parts: A 2021 Global Trade Perspective • The World Market for Copper Springs: A 2021 Global Trade Perspective • The World Market for Hinges of Base Metal: A 2021 Global Trade Perspective • The World Market for Iron and Steel Chain and Chain Parts: A 2021 Global Trade Perspective • The World Market for Iron or Steel Sewing and Knitting Needles, Bodkins, Crochet Hooks, and Embroidery Stilettos for Hand Use: A 2021 Global Trade Perspective • The World Market for Iron or Steel Skid Chain: A 2021 Global Trade Perspective • The World Market for Iron or Steel Springs and Leaves for Springs: A 2021 Global Trade Perspective • The World Market for Iron, Steel, or Copper Springs and Leaves for Springs: A 2021 Global Trade Perspective • The World Market for Non-Electric Bells and Gongs of Base Metal: A 2021 Global Trade Perspective • The World Market for Numbers, Letters, Symbols, Sign, Name, Address, and Similar Plates Made of Base Metal Excluding Articles and Parts for Lighting Fixtures: A 2021 Global Trade Perspective • The World Market for Padlocks, Locks, Clasps, Frames with Clasps and Locks, and Keys Made of Base Metal: A 2021 Global Trade Perspective • The World Market for Pins and Needles of Iron or Steel, Base Metal Beads and Spangles, and Base Metal Fittings Used for Clothing, Handbags, and Travel Goods: A 2021 Global Trade Perspective • The World Market for Stoppers, Caps, Lids, Capsules for Bottles, Threaded Bungs, Bung Covers, and Seals of Base Metal: A 2021 Global Trade Perspective • The World Market for Tubular Rivets, Beads and Spangles, Clasps, Buckles, Hooks, and Eyes for Clothing, Handbags, and Awnings Made of Base Metal: A 2021 Global Trade Perspective • The World Market for Wire, Rods, Electrodes Made of Base Metal or Metal Carbides; Flux Coated for Soldering; and Agglomerated Base Metal Powder for Metal Spraying: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron or steel springs and leaves for springs. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron or steel springs and leaves for springs for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying iron or steel springs and leaves for springs? What is the dollar value of these imports? How much do the imports of iron or steel springs and leaves for springs vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of iron or steel springs and leaves for springs? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported iron or steel springs and leaves for springs. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of iron or steel springs and leaves for springs, for each individual country. Chapter 4 does the same, but for imports of iron or steel springs and leaves for springs for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of iron or steel springs and leaves for springs to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in iron or steel springs and leaves for springs (i.e. their market shares are close or equal to zero percent). "Iron or Steel Springs and Leaves for Springs" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "iron or steel springs and leaves for springs" is 69941. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for iron or steel springs and leaves for springs. Closely related reports published by ICON Group include the following: • The World Market for Armored Safes, Strong-Boxes and Doors, Safe Deposit Lockers for Strong Rooms, and Cash and Deed Boxes of Base Metal: A 2021 Global Trade Perspective • The World Market for Base Metal Flexible Tubing: A 2021 Global Trade Perspective • The World Market for Castors of Base Metal: A 2021 Global Trade Perspective • The World Market for Copper Chain and Parts: A 2021 Global Trade Perspective • The World Market for Copper Springs: A 2021 Global Trade Perspective • The World Market for Hinges of Base Metal: A 2021 Global Trade Perspective • The World Market for Iron and Steel Chain and Chain Parts: A 2021 Global Trade Perspective • The World Market for Iron or Steel Anchors, Grapnels, and Their Parts: A 2021 Global Trade Perspective • The World Market for Iron or Steel Sewing and Knitting Needles, Bodkins, Crochet Hooks, and Embroidery Stilettos for Hand Use: A 2021 Global Trade Perspective • The World Market for Iron or Steel Skid Chain: A 2021 Global Trade Perspective • The World Market for Iron, Steel, or Copper Springs and Leaves for Springs: A 2021 Global Trade Perspective • The World Market for Non-Electric Bells and Gongs of Base Metal: A 2021 Global Trade Perspective • The World Market for Numbers, Letters, Symbols, Sign, Name, Address, and Similar Plates Made of Base Metal Excluding Articles and Parts for Lighting Fixtures: A 2021 Global Trade Perspective • The World Market for Padlocks, Locks, Clasps, Frames with Clasps and Locks, and Keys Made of Base Metal: A 2021 Global Trade Perspective • The World Market for Pins and Needles of Iron or Steel, Base Metal Beads and Spangles, and Base Metal Fittings Used for Clothing, Handbags, and Travel Goods: A 2021 Global Trade Perspective • The World Market for Stoppers, Caps, Lids, Capsules for Bottles, Threaded Bungs, Bung Covers, and Seals of Base Metal: A 2021 Global Trade Perspective • The World Market for Tubular Rivets, Beads and Spangles, Clasps, Buckles, Hooks, and Eyes for Clothing, Handbags, and Awnings Made of Base Metal: A 2021 Global Trade Perspective • The World Market for Wire, Rods, Electrodes Made of Base Metal or Metal Carbides; Flux Coated for Soldering; and Agglomerated Base Metal Powder for Metal Spraying: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for iron, steel, or copper springs and leaves for springs. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron, steel, or copper springs and leaves for springs for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying iron, steel, or copper springs and leaves for springs? What is the dollar value of these imports? How much do the imports of iron, steel, or copper springs and leaves for springs vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of iron, steel, or copper springs and leaves for springs? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported iron, steel, or copper springs and leaves for springs. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of iron, steel, or copper springs and leaves for springs, for each individual country. Chapter 4 does the same, but for imports of iron, steel, or copper springs and leaves for springs for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of iron, steel, or copper springs and leaves for springs to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in iron, steel, or copper springs and leaves for springs (i.e. their market shares are close or equal to zero percent). "Iron, Steel, or Copper Springs and Leaves for Springs" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "iron, steel, or copper springs and leaves for springs" is 6994. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for iron, steel, or copper springs and leaves for springs. Closely related reports published by ICON Group include the following: • The World Market for Aluminum Doors, Windows, Door Thresholds, and Window Frames: A 2021 Global Trade Perspective • The World Market for Agricultural or Horticultural Hand Tools Including Spades, Shovels, Mattocks, Picks, Hoes, Forks, Rakes, Axes, Bill Hooks, Pruners, Scythes, and Sickles: A 2021 Global Trade Perspective • The World Market for Aluminum Containers for Compressed Air or Liquefied Gas: A 2021 Global Trade Perspective • The World Market for Aluminum Nails, Tacks, Staples, Screws, Bolts, Nuts, Rivets, and Washers Excluding Staples in Strips for Office Use: A 2021 Global Trade Perspective • The World Market for Aluminum Reservoirs, Tanks, Vats, and Similar Containers with Capacity of over 300 Liters: A 2021 Global Trade Perspective • The World Market for Aluminum Stranded Wire, Cable, Ropes, and Plaited Bands Excluding Electrically Insulated: A 2021 Global Trade Perspective • The World Market for Aluminum Structures and Parts of Structures: A 2021 Global Trade Perspective • The World Market for Aluminum Tanks, Casks, Drums, Cans, and Similar Containers with Capacity of Less Than 300 Liters: A 2021 Global Trade Perspective • The World Market for Anvils, Portable Forges, and Hand- or Pedal-Operated Grinding Wheels with Frameworks: A 2021 Global Trade Perspective • The World Market for Armored Safes, Strong-Boxes and Doors, Safe Deposit Lockers for Strong Rooms, and Cash and Deed Boxes of Base Metal: A 2021 Global Trade Perspective • The World Market for Band Saw Blades: A 2021 Global Trade Perspective • The World Market for Base Metal Flexible Tubing: A 2021 Global Trade Perspective • The World Market for Castors of Base Metal: A 2021 Global Trade Perspective • The World Market for Chain Saw Blades: A 2021 Global Trade Perspective • The World Market for Circular, Slitting, or Slotting Saw Blades with Working Part of Steel: A 2021 Global Trade Perspective • The World Market for Circular, Slitting, or Slotting Saw Blades with Working Part of Materials Other Than Steel: A 2021 Global Trade Perspective • The World Market for Copper Chain and Parts: A 2021 Global Trade Perspective • The World Market for Copper Nails, Tacks, Drawing Pins, and Staples Excluding Staples in Strips for Office Use: A 2021 Global Trade Perspective • The World Market for Copper Nails, Tacks, Drawing Pins, Staples, Screws, Bolts, Nuts, Screw Hooks, Rivets, and Washers Excluding Staples in Strips for Office Use: A 2021 Global Trade Perspective • The World Market for Copper Non-Electric Domestic Cooking or Heating Equipment and Parts: A 2021 Global Trade Perspective • The World Market for Copper Springs: A 2021 Global Trade Perspective • The World Market for Copper Stranded Wire, Cable, Ropes, and Plaited Bands Excluding Electrically Insulated: A 2021 Global Trade Perspective • The World Market for Copper Wire Cloth, Endless Bands, Grill, Netting, Fencing, and Expanded Metal: A 2021 Global Trade Perspective • The World Market for Drilling, Threading, and Tapping Tools: A 2021 Global Trade Perspective • The World Market for Files, Rasps, and Similar Tools: A 2021 Global Trade Perspective • The World Market for Hammers and Sledge Hammers: A 2021 Global Trade Perspective • The World Market for Hand Saws: A 2021 Global Trade Perspective • The World Market for Hand Saws, Files, Rasps, Pliers, Pincers, Tweezers, Metal Cutting Shears, Pipe Cutters and Similar Hand Tools: A 2021 Global Trade Perspective • The World Market for Hand-Operated Mechanical Appliances Weighing Up to 10 kg, Used in the Preparation, Conditioning, or Serving of Food or Drink, and Made of Base Metal: A 2021 Global Trade Perspective • The World Market for Hand-Operated Spanners, Wrenches, Interchangeable Spanner Sockets, and Torque Meter Wrenches Excluding Tap Wrenches: A 2021 Global Trade Perspective • The World Market for Hinges of Base Metal: A 2021 Global Trade Perspective • The World Market for Interchangeable Tools for Hand Tools or for Machine-Tools Including Dies for Extruding Metal: A 2021 Global Trade Perspective • The World Market for Iron and Steel Chain and Chain Parts: A 2021 Global Trade Perspective • The World Market for Iron or Steel Anchors, Grapnels, and Their Parts: A 2021 Global Trade Perspective • The World Market for Iron or Steel Barbed Wire and Twisted Hoop or Single Flat Wire Loosely Twisted Double Wire Used for Fencing: A 2021 Global Trade Perspective • The World Market for Iron or Steel Bridges and Bridge Sections: A 2021 Global Trade Perspective • The World Market for Iron or Steel Containers for Compressed Air or Liquefied Gas: A 2021 Global Trade Perspective • The World Market for Iron or Steel Domestic Stoves, Grates, and Non-Electric Space Heaters Excluding Kitchen Appliances: A 2021 Global Trade Perspective • The World Market for Iron or Steel Doors, Windows, Door Thresholds, and Window Frames: A 2021 Global Trade Perspective • The World Market for Iron or Steel Equipment for Scaffolding, Shuttering, Propping, or Pit-Propping : A 2021 Global Trade Perspective • The World Market for Iron or Steel Nails, Tacks, and Staples Excluding Staples in Strips for Office Use and Articles with Copper Heads: A 2021 Global Trade Perspective • The World Market for Iron or Steel Parts of Domestic Non-Electric Cooking Appliances and Heaters: A 2021 Global Trade Perspective • The World Market for Iron or Steel Reservoirs, Tanks, Vats, and Similar Containers with Capacity of over 300 Liters: A 2021 Global Trade Perspective • The World Market for Iron or Steel Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers, and Similar Articles: A 2021 Global Trade Perspective • The World Market for Iron or Steel Sewing and Knitting Needles, Bodkins, Crochet Hooks, and Embroidery Stilettos for Hand Use: A 2021 Global Trade Perspective • The World Market for Iron or Steel Skid Chain: A 2021 Global Trade Perspective • The World Market for Iron or Steel Springs and Leaves for Springs: A 2021 Global Trade Perspective • The World Market for Iron or Steel Stranded Wire, Cable, Ropes, and Plaited Bands Excluding Electrically Insulated: A 2021 Global Trade Perspective • The World Market for Iron or Steel Structures and Parts of Structures: A 2021 Global Trade Perspective • The World Market for Iron or Steel Tanks, Casks, Drums, Cans, and Similar Containers with Capacity of Less Than 300 Liters: A 2021 Global Trade Perspective • The World Market for Iron or Steel Threaded Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers, and Similar Articles: A 2021 Global Trade Perspective • The World Market for Iron or Steel Towers and Lattice Masts: A 2021 Global Trade Perspective • The World Market for Iron or Steel Unthreaded Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers, and Similar Articles: A 2021 Global Trade Perspective • The World Market for Iron or Steel Wire Cloth, Grill, Netting, Fencing, and Expanded Metal: A 2021 Global Trade Perspective • The World Market for Iron or Steel Wool, Pot Scourers, and Iron or Steel Scouring or Polishing Pads and Gloves: A 2021 Global Trade Perspective • The World Market for Iron, Steel or Aluminum Reservoirs, Tanks, Vats and Similar Containers with a Capacity of over 300 Liters: A 2021 Global Trade Perspective • The World Market for Iron, Steel, or Aluminum Tanks, Casks, Drums, Cans, and Similar Containers with Capacity of Less Than 300 Liters: A 2021 Global Trade Perspective • The World Market for Iron, Steel, or Copper Non-Electric Domestic Cooking or Heating Equipment and Parts: A 2021 Global Trade Perspective • The World Market for Knives and Cutting Blades for Machines or Mechanical Appliances: A 2021 Global Trade Perspective • The World Market for Knives and Cutting Blades for Machines or Mechanical Appliances, Interchangeable Tools for Hand or Machine Tools, and Tool Plates, Sticks, and Tips: A 2021 Global Trade Perspective • The World Market for Manicure or Pedicure Sets and Instruments Including Nail Files: A 2021 Global Trade Perspective • The World Market for Non-Electric Bells and Gongs of Base Metal: A 2021 Global Trade Perspective • The World Market for Non-Electric Domestic Cooking or Heating Equipment of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Non-Electric Razors: A 2021 Global Trade Perspective • The World Market for Numbers, Letters, Symbols, Sign, Name, Address, and Similar Plates Made of Base Metal Excluding Articles and Parts for Lighting Fixtures: A 2021 Global Trade Perspective • The World Market for Padlocks, Locks, Clasps, Frames with Clasps and Locks, and Keys Made of Base Metal: A 2021 Global Trade Perspective • The World Market for Paper Knives, Letter Openers, Erasing Knives, and Pencil Sharpeners: A 2021 Global Trade Perspective • The World Market for Pins and Needles of Iron or Steel, Base Metal Beads and Spangles, and Base Metal Fittings Used for Clothing, Handbags, and Travel Goods: A 2021 Global Trade Perspective • The World Market for Planes, Chisels, Gouges, and Similar Cutting Tools for Working Wood: A 2021 Global Trade Perspective • The World Market for Pliers, Cutting Pliers, Pincers, Tweezers, Metal Cutting Shears, Pipe Cutters, and Similar Tools: A 2021 Global Trade Perspective • The World Market for Razors and Razor Blades: A 2021 Global Trade Perspective • The World Market for Safety Razor Blades: A 2021 Global Trade Perspective • The World Market for Saw Blades Including Slitting, Slotting, or Toothless Varieties: A 2021 Global Trade Perspective • The World Market for Scissors, Tailors' Shears, and Similar Shears and Blades: A 2021 Global Trade Perspective • The World Market for Screwdrivers: A 2021 Global Trade Perspective • The World Market for Spoons, Forks, Ladles, Skimmers, Cake-Servers, and Non-Cutting Fish Knives and Butter Knives: A 2021 Global Trade Perspective • The World Market for Statuettes and Ornaments, Photograph or Picture Frames, and Mirrors made of Base Metal: A 2021 Global Trade Perspective • The World Market for Stoppers, Caps, Lids, Capsules for Bottles, Threaded Bungs, Bung Covers, and Seals of Base Metal: A 2021 Global Trade Perspective • The World Market for Straight Saw Blades for Working Metal: A 2021 Global Trade Perspective • The World Market for Stranded Wire, Cable, Ropes, and Plaited Bands of Iron, Steel, Copper, or Aluminum Excluding Electrically Insulated: A 2021 Global Trade Perspective • The World Market for Tableware and Kitchen Articles Not Plated with Precious Metal: A 2021 Global Trade Perspective • The World Market for Tableware in Sets Containing At Least One Article Plated with Precious Metal: A 2021 Global Trade Perspective • The World Market for Tableware in Sets Containing No Articles Plated with Precious Metal: A 2021 Global Trade Perspective • The World Market for Tableware Plated with Precious Metal: A 2021 Global Trade Perspective • The World Market for Threaded Copper Screws, Bolts, Nuts, and Washers: A 2021 Global Trade Perspective • The World Market for Tool Sets for Retail Sale: A 2021 Global Trade Perspective • The World Market for Tools for Rock Drilling or Earth Boring: A 2021 Global Trade Perspective • The World Market for Tubular Rivets, Beads and Spangles, Clasps, Buckles, Hooks, and Eyes for Clothing, Handbags, and Awnings Made of Base Metal: A 2021 Global Trade Perspective • The World Market for Unmounted Tool Plates, Sticks, and Tips of Sintered Metal Carbides or Cermets: A 2021 Global Trade Perspective • The World Market for Unthreaded Copper Washers and Spring Washers: A 2021 Global Trade Perspective • The World Market for Vices and Clamps: A 2021 Global Trade Perspective • The World Market for Wire Cloth, Grill, Netting, Fencing, and Expanded Metal of Iron, Steel, or Copper: A 2021 Global Trade Perspective • The World Market for Wire, Rods, Electrodes Made of Base Metal or Metal Carbides; Flux Coated for Soldering; and Agglomerated Base Metal Powder for Metal Spraying: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of Less Than 600 Mm Wide and At Least 4.75 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick" is 67537. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of less than 600 mm wide and at least 4.75 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and 4.75 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick" is 67534. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick? What is the dollar value of these imports? How much do the imports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick, for each individual country. Chapter 4 does the same, but for imports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick (i.e. their market shares are close or equal to zero percent). "Hot-rolled, Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 3 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick" is 67536. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled, stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick" is 67535. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled product. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled product for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled product? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled product vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled product? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled product. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled product, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled product for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled product to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled product (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Product" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled product" is 6753. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled product. Closely related reports published by ICON Group include the following: • The World Market for Alloy Pig Iron and Spiegeleisen in Primary Forms: A 2021 Global Trade Perspective • The World Market for Alloy Steel Ingots and Other Primary Forms Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Alloy Steel Semi-Finished Products: A 2021 Global Trade Perspective • The World Market for Alloy Steel Semi-Finished Products Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Alloy Steel Wire Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Cast Iron Nonmalleable Cast Fittings: A 2021 Global Trade Perspective • The World Market for Cast Iron Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Cold-Formed or Cold-Finished Iron and Non-Alloy Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Iron and Non-Alloy Steel Flat-Rolled Products Measuring At Least 600 mm Wide and 3 mm Thick Excluding Coils (Yield Points): A 2021 Global Trade Perspective • The World Market for Cold-Rolled Iron or Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for Concrete Reinforcing Bars of Iron or Non-Alloy Steel and Bars and Rods of Free-Cutting Steel in Irregularly Wound Coils: A 2021 Global Trade Perspective • The World Market for Ferrochromium: A 2021 Global Trade Perspective • The World Market for Ferromanganese: A 2021 Global Trade Perspective • The World Market for Ferromanganese with Less Than 2% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Ferromanganese with over 2% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Ferronickel: A 2021 Global Trade Perspective • The World Market for Ferrosilicon: A 2021 Global Trade Perspective • The World Market for Ferrosilicon Chromium: A 2021 Global Trade Perspective • The World Market for Ferrosilicon Manganese: A 2021 Global Trade Perspective • The World Market for Free-Cutting Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Granules of Pig Iron, Spiegeleisen, Iron, or Steel: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hollow Drill Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron and Non-Alloy Steel Bars and Rods That Have Been Deformed during Rolling: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron or Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Iron or Non-Alloy Steel Flat-Rolled Products Measuring 150-600 mm Wide and At Least 4 mm Thick Excluding Coils (Yield Points): A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Free-Cutting Steel Bars and Rods in Irregular Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections Less Than 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Hot-Drawn, or Extruded Iron and Non-Alloy Steel with U, I, H, L and T Sections of At Least 80 mm High: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Electrolytically Plated with Zinc and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Electrolytically Plated with Zinc and Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Aluminum and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Chromium Oxides or Chromium and Chromium Oxides and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Lead or Tern-Plate and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Tin: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Tin and At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Flat-Rolled Products Plated or Coated with Tin and Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Iron and Non-Alloy Steel Wire: A 2021 Global Trade Perspective • The World Market for Iron and Steel Angles, Shapes, Sections (Excluding Rails), and Sheet Piling: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing and Tubing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Casing Used in Drilling for Oil or Gas: A 2021 Global Trade Perspective • The World Market for Iron and Steel Cast Fittings Excluding of Nonmalleable Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Line Pipe with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm for Oil and Gas Pipelines Excluding Seamless Line Pipe: A 2021 Global Trade Perspective • The World Market for Iron and Steel Rails Excluding Check-Rails and Rack Rails: A 2021 Global Trade Perspective • The World Market for Iron and Steel Railway and Tramway Track Construction Material: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Line Pipe Used for Oil and Gas Pipelines Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron and Steel Seamless Tubes, Pipes, and Hollow Profiles: A 2021 Global Trade Perspective • The World Market for Iron and Steel Sheet Piling, Welded Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tube and Pipe Fittings: A 2021 Global Trade Perspective • The World Market for Iron and Steel Tubes and Pipes with Internal and External Circular Cross-Sections and External Diameter over 406.4 mm Excluding Tubes and Pipes: A 2021 Global Trade Perspective • The World Market for Iron Casing, Tubing, and Drill Pipe Used in Drilling for Oil or Gas Excluding Those Made of Cast Iron: A 2021 Global Trade Perspective • The World Market for Iron Less Than 99.94% Pure or Non-Alloy Steel in Primary Forms Excluding Ingots: A 2021 Global Trade Perspective • The World Market for Iron Less Than 99.94% Pure or Non-Alloy Steel Ingots: A 2021 Global Trade Perspective • The World Market for Iron Less Than 99.94% Pure or Steel Ingots and Other Primary Forms: A 2021 Global Trade Perspective • The World Market for Iron of At Least 99.94% Purity and Spongy Ferrous Products in Lumps, Pellets, and Similar Forms: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Products Containing At Least .25% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Products Containing Less Than .25% Carbon by Weight: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Shapes Containing Less Than .25% Carbon by Weight with a Nonsquare Rectangular Cross Section: A 2021 Global Trade Perspective • The World Market for Iron or Non-Alloy Steel Semi-Finished Shapes Containing Less Than .25% Carbon by Weight with Square Cross Section and Specified Width under Twice the Thickness: A 2021 Global Trade Perspective • The World Market for Irregular Coils of Hot-Rolled Stainless Steel Bars and Rods: A 2021 Global Trade Perspective • The World Market for Nonalloyed Pig Iron in Primary Forms with Less Than 0.50% Phosphorus by Weight: A 2021 Global Trade Perspective • The World Market for Nonalloyed Pig Iron in Primary Forms with over 0.50% Phosphorus by Weight: A 2021 Global Trade Perspective • The World Market for Painted, Varnished, or Plastic-Coated Iron and Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Painted, Varnished, or Plastic-Coated Iron and Non-Alloy Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Painted, Varnished, or Plastic-Coated Iron and Non-Alloy Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Pig iron and Spiegeleisen in Pigs, Blocks, and Other Primary Forms: A 2021 Global Trade Perspective • The World Market for Pig Iron, Spiegeleisen, Iron or Steel Granules and Powders; Spongy Ferrous Products and Iron in Lumps or Pellets of At Least 99.94% Purity: A 2021 Global Trade Perspective • The World Market for Plated or Zinc-Coated Iron and Non-Alloy Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Powders of Pig Iron, Spiegeleisen, Iron, or Steel: A 2021 Global Trade Perspective • The World Market for Ribbed Iron Bars and Rods: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Stainless Steel Angles, Shapes, and Sections: A 2021 Global Trade Perspective • The World Market for Stainless Steel Butt Welded Fittings: A 2021 Global Trade Perspective • The World Market for Stainless Steel Flanges: A 2021 Global Trade Perspective • The World Market for Stainless Steel Ingots and Other Primary Forms: A 2021 Global Trade Perspective • The World Market for Stainless Steel Semi-Finished Products: A 2021 Global Trade Perspective • The World Market for Stainless Steel Threaded Elbows, Bends, and Sleeves: A 2021 Global Trade Perspective • The World Market for Stainless Steel Wire: A 2021 Global Trade Perspective • The World Market for Steel Wire Made of Stainless Steel and Other Alloys: A 2021 Global Trade Perspective ...

9/4/2020

x

Use Code

SDMR20

Purchase any report

AVAIL FLAT DISCOUNT