Contact – +1-276-477-5910
Email – [email protected]

Home >> Latest Reports

LATEST REPORTS

PRESS RELEASES

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 3 Mm Thick In Coils: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils. With the globalization of this market, managers can no...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and 4.75 Mm Thick In Coils: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils. With the globalization of this market, managers can no longer...

9/4/2020 | Iron & Steel

The World Market for Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick In Coils: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils. With the globalization of this market, managers can...

9/4/2020 | Iron & Steel

The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel. With the globalization of this market, managers can no longer be contented ...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrap of alloy steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with ...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for copper ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with ou...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings. With the globalization of this market, managers can no longer be contented with...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrapof stainless steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented wi...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrap of alloy steel excluding stainless steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can m...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrap of tinned iron or steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be conten...

9/4/2020 | Iron & Steel;Metal, Metallurgy, Mining and Mineral

First
Previous
2
3
4
5
6
7
8
9
10
11
Next

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Less Than 3 Mm Thick In Coils" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils" is 67533. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and less than 3 mm thick in coils. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and 4.75 Mm Thick In Coils" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils" is 67531. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and 4.75 mm thick in coils. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils? What is the dollar value of these imports? How much do the imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils, for each individual country. Chapter 4 does the same, but for imports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils (i.e. their market shares are close or equal to zero percent). "Hot-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick In Coils" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils" is 67532. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for hot-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick in coils. Closely related reports published by ICON Group include the following: • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective • The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective • The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel? What is the dollar value of these imports? How much do the imports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel, for each individual country. Chapter 4 does the same, but for imports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel (i.e. their market shares are close or equal to zero percent). "Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel" is 2823. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for ferrous metal waste and scrap excluding waste and scrap of cast iron and alloy steel. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-Weight Manganese Content of 20% or More: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrap of alloy steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for waste and scrap of alloy steel for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying waste and scrap of alloy steel? What is the dollar value of these imports? How much do the imports of waste and scrap of alloy steel vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of waste and scrap of alloy steel? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported waste and scrap of alloy steel. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of waste and scrap of alloy steel, for each individual country. Chapter 4 does the same, but for imports of waste and scrap of alloy steel for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of waste and scrap of alloy steel to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in waste and scrap of alloy steel (i.e. their market shares are close or equal to zero percent). "Waste and Scrap of Alloy Steel" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "waste and scrap of alloy steel" is 2822. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for waste and scrap of alloy steel. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-Weight Manganese Content of 20% or More: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for copper ores and concentrates. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for copper ores and concentrates for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying copper ores and concentrates? What is the dollar value of these imports? How much do the imports of copper ores and concentrates vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of copper ores and concentrates? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported copper ores and concentrates. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of copper ores and concentrates, for each individual country. Chapter 4 does the same, but for imports of copper ores and concentrates for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of copper ores and concentrates to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in copper ores and concentrates (i.e. their market shares are close or equal to zero percent). "Copper Ores and Concentrates" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "copper ores and concentrates" is 2831. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for copper ores and concentrates. Closely related reports published by ICON Group include the following: • The World Market for Roasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Alumina (Aluminum Oxide) Excluding Artificial Corundum: A 2021 Global Trade Perspective • The World Market for Aluminum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Aluminum Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Chromium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Cobalt Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Copper Mattes: A 2021 Global Trade Perspective • The World Market for Copper Mattes and Cement Copper (Precipitated Copper): A 2021 Global Trade Perspective • The World Market for Copper Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Iron Ore Agglomerates: A 2021 Global Trade Perspective • The World Market for Lead Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Lead Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Manganese Ores and Concentrates Including Manganiferous Iron Ores and Concentrates with Dry-Weight Manganese Content of 20% or More: A 2021 Global Trade Perspective • The World Market for Nickel Mattes: A 2021 Global Trade Perspective • The World Market for Nickel Mattes, Nickel Oxide Sinters and Other Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Nickel Oxide Sinters and Intermediate Products of Nickel Metallurgy: A 2021 Global Trade Perspective • The World Market for Nickel Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Niobium, Tantalum, or Vanadium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Molybdenum, Niobium, Tantalum, Titanium, Vanadium and Zirconium: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals: A 2021 Global Trade Perspective • The World Market for Ores and Concentrates of Precious Metals Excluding Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Roasted Iron Pyrites: A 2021 Global Trade Perspective • The World Market for Silver Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Thorium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tin Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Titanium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Tungstun or Wolfram Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Unagglomerated Iron Ore and Concentrates: A 2021 Global Trade Perspective • The World Market for Unroasted Molybdenum Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Uranium Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Platinum and Metal Clad with Platinum Excluding Sweepings Containing Other Precious Metals: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Precious Metal or of Metal Clad with Precious Metal Excluding Gold Clad and Gold Waste and Scrap: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective • The World Market for Zinc Ores and Concentrates: A 2021 Global Trade Perspective • The World Market for Zinc Waste and Scrap Excluding Zinc Dust: A 2021 Global Trade Perspective • The World Market for Zirconium Ores and Concentrates: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings? What is the dollar value of these imports? How much do the imports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings, for each individual country. Chapter 4 does the same, but for imports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings (i.e. their market shares are close or equal to zero percent). "Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings" is 28232. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for ferrous metal turnings, shavings, chips, milling waste, trimmings, and stampings. Closely related reports published by ICON Group include the following: • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrapof stainless steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for waste and scrapof stainless steel for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying waste and scrapof stainless steel? What is the dollar value of these imports? How much do the imports of waste and scrapof stainless steel vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of waste and scrapof stainless steel? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported waste and scrapof stainless steel. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of waste and scrapof stainless steel, for each individual country. Chapter 4 does the same, but for imports of waste and scrapof stainless steel for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of waste and scrapof stainless steel to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in waste and scrapof stainless steel (i.e. their market shares are close or equal to zero percent). "Waste and Scrapof Stainless Steel" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "waste and scrapof stainless steel" is 28221. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for waste and scrapof stainless steel. Closely related reports published by ICON Group include the following: • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrap of alloy steel excluding stainless steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for waste and scrap of alloy steel excluding stainless steel for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying waste and scrap of alloy steel excluding stainless steel? What is the dollar value of these imports? How much do the imports of waste and scrap of alloy steel excluding stainless steel vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of waste and scrap of alloy steel excluding stainless steel? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported waste and scrap of alloy steel excluding stainless steel. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of waste and scrap of alloy steel excluding stainless steel, for each individual country. Chapter 4 does the same, but for imports of waste and scrap of alloy steel excluding stainless steel for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of waste and scrap of alloy steel excluding stainless steel to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in waste and scrap of alloy steel excluding stainless steel (i.e. their market shares are close or equal to zero percent). "Waste and Scrap of Alloy Steel Excluding Stainless Steel" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "waste and scrap of alloy steel excluding stainless steel" is 28229. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for waste and scrap of alloy steel excluding stainless steel. Closely related reports published by ICON Group include the following: • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Tinned Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective ...

9/4/2020

This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for waste and scrap of tinned iron or steel. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for waste and scrap of tinned iron or steel for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models. On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying waste and scrap of tinned iron or steel? What is the dollar value of these imports? How much do the imports of waste and scrap of tinned iron or steel vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of waste and scrap of tinned iron or steel? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers? In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported waste and scrap of tinned iron or steel. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes. After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of waste and scrap of tinned iron or steel, for each individual country. Chapter 4 does the same, but for imports of waste and scrap of tinned iron or steel for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of waste and scrap of tinned iron or steel to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in waste and scrap of tinned iron or steel (i.e. their market shares are close or equal to zero percent). "Waste and Scrap of Tinned Iron or Steel" as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines "waste and scrap of tinned iron or steel" is 28231. To ensure that you have the most current version of this report, please visit the ICON Group website at www.icongrouponline.com. Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, "mad cow" disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the "net loss" or "net gain" due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place. Related Reports: This report was created for the market for waste and scrap of tinned iron or steel. Closely related reports published by ICON Group include the following: • The World Market for Ferrous Metal Turnings, Shavings, Chips, Milling Waste, Trimmings, and Stampings: A 2021 Global Trade Perspective • The World Market for Ferrous Metal Waste and Scrap Excluding Waste and Scrap of Cast Iron and Alloy Steel: A 2021 Global Trade Perspective • The World Market for Remelting Ingots of Iron or Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Alloy Steel Excluding Stainless Steel: A 2021 Global Trade Perspective • The World Market for Waste and Scrap of Cast Iron: A 2021 Global Trade Perspective • The World Market for Waste and Scrapof Stainless Steel: A 2021 Global Trade Perspective ...

9/4/2020

x

Use Code

SDMR20

Purchase any report

AVAIL FLAT DISCOUNT